05-14-2009 11:12 PM
Hi ,
I am not able to telnet to my ace module please see the error/msg i see when i try to login:-
[Switch6500]$ telnet acemod2
Trying 10.10.10.2.
Connected to acemod2.asia.com
acemod2 login: admin
Password:
Context not found, called API timed out
[Switch6500]$ telnet acemod2
Trying 10.10.10.2....
Connected to acemod2.asia.com.
Escape character is '^]'.
Error: context name (id:0) cannot be determined.
Any help on this will be highly appriciated.
Thanks,
Sum.
05-14-2009 11:29 PM
Hi,
are you trying to telnet the Admin context or another context?
Can you try to access it via the C6500?
use following command from the supervisor of your C6500:
session slot "slot number of ACE module" processor 0
Does this work?
05-15-2009 01:00 AM
hi,
yes this works. Console works fine as well. In regards to telnet it was working fine before but dont know it stopped working now.
Reg,
Sum.
05-19-2009 11:32 AM
This is most likely a result of aclmerge process pegging cpu. from console do:
show proc cpu | inc aclmerged
see if processes are high.
aclmerge performance was improved in A2(2.x) code
10-28-2009 01:47 AM
Hi Letrenta,
Now I am facing the issue while try to get into the ACE from cat 6500 switch.
C6509#session slot 2 processor 0
Error: context name (id:0) cannot be determined.
What can i do now???
Regards,
Sum
10-28-2009 11:04 AM
It looks as if you are hitting CSCsv98101
Did you reload the ACE module and see if it fixes it?
Thanks
Syed
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide