Hi Experts,I have a issue that when I forced the duplex settings to 100/full the link goes down. No leds on the ports.Were as the link works fine with Auto mode. Setup:-1) Cisco 3120-Speed 100 duplex full----cross over cable---3750- Speed 100 duplex...
Hi Experts,My question is one of my ACE module running A2(1.6a) have been crashed due to SRAM parity error.ACE20Admin#show versionSoftware Version A2(1.6a)last boot reason: NP 1 Failed : SRAM Parity Error Chan 2I would like to know is this a Softwa...
Hi Experts,Could you please help me on this issue:-The users are not able to access the palm application passing through the ACE module. The clients gets to the citrik server and from ther it goes to palm application. Now both external and internal ...
Hi,I have configured HREAP but not applied to any AP, My question is when i view the AP config i see the AP group name as none and for other ap as "group-default" can anyone tell me why am i seeing this??ThanksSum
Hi,Can someone guide me the link about the configuration of radius authentication on ACS(4.1)and how to assign the rights(admi & user) for all the cisco swithes.Thanks in advnce.regards,Sum.
HI,As I told earlier it was fine with the auto mode both ends. I want to manually configure Speed to 100 and duplex to FULL which is not working and facing the issue.1) Checked the auto mdx is enabled by default tried disabling at one end and enablin...
Hi Letrenta,Now I am facing the issue while try to get into the ACE from cat 6500 switch.C6509#session slot 2 processor 0 Error: context name (id:0) cannot be determined.What can i do now???Regards,Sum
Hello leo,Thanks for the update. I know when i apply the HREAP to AP it works but my question was why is the AP mode getting "default-group mode" and "none" mode for some AP without applying the HREAP config on them.Whats the difference between them(...
Hi Giles,I looked at the traces but there is nothing much present as the connection works and everything is working fine as it should be but only the problem when i click the logout button of the banking site I get page cannot be displayed this is st...