06-14-2004 05:50 AM
Is it possible to have one service receive 100% of traffic and use a second service as failover on a single CSS using CSS's already configured in Active-Standby modes.
Typically we have duplicate services on separate CSS's, but now our Systems engineering group want to know if we can do it this way.
Solved! Go to Solution.
06-14-2004 09:22 AM
Hi Carl,
You can use the primary sorry server command. When the service(s) dies, the primary sorry server takes all the connections.
Here is the command.
primarySorryServer server11
If you want, you can go through this link.
http://www.cisco.com/univercd/cc/td/doc/product/webscale/css/css_720/bsccfggd/contrule.htm#1038009
Regards,
Sagar
06-14-2004 09:22 AM
Hi Carl,
You can use the primary sorry server command. When the service(s) dies, the primary sorry server takes all the connections.
Here is the command.
primarySorryServer server11
If you want, you can go through this link.
http://www.cisco.com/univercd/cc/td/doc/product/webscale/css/css_720/bsccfggd/contrule.htm#1038009
Regards,
Sagar
06-14-2004 10:36 AM
Thanks Sagar,
This answers my question.
Carl
06-29-2004 09:41 AM
The ssumption with a sorry server configuration is that the backup server is less capable than the primary. If the backup is equally capable (bandwidth, etc..), but you just want to have it as a hot standby you can weight the services with a high differential. I guess its just a different approach based on the servers' logical roles.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide