Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We are deploying application policy on an incremental basis. One site this week, another next week using the same policy. If I deselect last weeks site scope selections and change the selections when I deploy this weeks application policy, is device ...
Hi,I have a lab setup where I am running 2 MPLS clouds with a 3rd tier path over DMVPN. The routing over MPLS works fine, local preferences and AS path prepending take care of the path selection using route-maps to differentiate traffic types.The h...
Hi,I have a DS3 terminated on a 3825 with bridging configured with all interfaces in the same bridge group.The DS3 is frame-relay leading to my BGP neighbor.I'm unable to get BGP established across the bridge. Frame is up and I can ping from BGP rout...
Hi,I'd like to establish a more robust border router/switch redundancy plan and would like to know if this seems like it would be reliable.I'm looking at using a couple of 3945 routers and 3750 switches in the configuration shown below.The article fo...
I am unable to get NAT rules to work. I can't find anything in the ASDM guide that explains this.Will unchecking "Enable traffic through firewall without address translation" effectively disable my NAT rules?
I don’t know that it’s a bug, or at least one hasn’t been identified that I know of. The workaround has always been to regenerate the certificates for messaging and watch the paint dry. I did sit in on a TAC case a couple years ago for a 3.1 installa...
Hi Marco,The upgrade was from 3.1 latest patch at the time, to 3.2 including the latest patch at the time.There were actually 12 nodes in this deployment, and I’m not sure why the queue-link error started. The fix is fairly simple (replace certificat...
I agree. I did the same. It made more sense to get familiar with the GUI and how to build profiles, policies, and use tags. Start fresh and you'll clear out a lot of old garbage that never got removed over the years.
I'd like to know what the over all impact at the time the root CA cert is replaced.
Do all nodes need to be rebooted, if so what order?
How does this affect the deployment. Does it break?
