08-01-2013 11:15 AM
I have an ACE30 with 2 client facing vlans and 2 server facing vlans within the same context. I need to NAT traffic originating from a server to the VIP of client vlan 2, however the default gateway points to client vlan1. How do I configure this?
08-02-2013 11:57 AM
Hi,
Please send me the running-config of the ACE and let me know the VIP address and what is the IP address of the server originating the connection you need to NAT
Is there an specific reason why you need to NAT the traffic from the server going to the VIP?
---------------------
Cesar R
ANS Team
08-02-2013 12:49 PM
I'll attach a config shortly.
We are not trying to NAT the server going to the vip. The server needs to access the Internet and on its way out through the ACE we want to NAT it to the VIP. The issue is there are 2 client facing vlans(292 and 294) and 2 server vlans(226 and 246). This particualr app is using the combination vlan 246/292 but the default route out is through vlan 294. Hope that doesn't confuse you more.
08-05-2013 11:01 AM
Please send me the running-config and let me know the IP address of the server, the Vlan and the IP address it should be natted.
---------------------
Cesar R
ANS Team
08-05-2013 11:10 AM
I am working on making up a shorter version of the config as the running config is enormous and for security reasons I can't send the complete config. As soon as I get it finished I will post it.
Thanks
08-06-2013 10:54 AM
config is now attached.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide