cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
701
Views
13
Helpful
4
Replies

How to set trap destination on GSS

georg.tresselt
Level 1
Level 1

Hi,

Can anyone tell a poor fool like me how to enable SNMP traps and set the trap destionation on a GSS ? Can't find it in the documentation.

Thanx alot

Georg

4 Replies 4

Gilles Dufour
Cisco Employee
Cisco Employee

there is no snmptrap support on the GSS currently.

You will have to use syslog.

Moe.GSS1.com(config)#logging host ?

enable Enable remote logging

ip IP address of host

priority Priority level when log to host

subsystem Set subsystem level logging severity

Regards,

Gilles.

- please take the time to rate each answer provided to you by our community.

Well, that's not exactly what I'd like to hear. Thanx alot anyway

Given that the GSS actually runs Redhat Linus with a UCD-SNMP agent, isn't there a work-around like setting the trap destination directly in a config file?

unfortunately there is no workaround.

Several customers requested the snmp traps and it is apparently on the roadmap.

If you really need this feature you should ask your Cisco sales representative to contact the GSS product manager.

Gilles.

Review Cisco Networking for a $25 gift card