Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, Can anyone tell a poor fool like me how to enable SNMP traps and set the trap destionation on a GSS ? Can't find it in the documentation. Thanx alot Georg
Hi,My customer wants to manage their devices by ip address only. No DNS entries, for security reasons.But crmlog.exe (LMS 2.2 IDU9 / Win2k Adv Server SP4) keeps trying to do reverse lookups of the sender ip addresses of syslog messages with the resul...
Hi,I'm just back from a customer who angrily scrapped CW LMS 2.2 as it turned out that not all syslog messages sent show up in syslog.log (on Win2k).First sniffed the traffic and saw all messages passing, then we replaced the CW2k server with a Linux...
Hi,I'm just back from a customer who angrily scrapped CW LMS 2.2 as it turned out that not all syslog messages sent show up in syslog.log (on Win2k).First sniffed the traffic and saw all messages passing, then we replaced the CW2k server with a Linux...
Hi,I just heard that Cisco is offering previews on LMS 2.5 in Danmark. Unfortunately, I'm more than 1000 km south in Switzerland. Could anyone give some details about this new version?Many thanxGeorg
Maybe, your test device doesn't support it cause there is an RTTMON jitter table in RTTMON MIB. Have a look at this doc:http://www.cisco.com/en/US/tech/tk869/tk769/technologies_white_paper09186a00801b1a1e.shtml#pollingmibtables
Based on the IP address, you should know the default gateway. There I would check the ARP cache to find out the MAC address. Then you would have to search through the switches forwarding tables to locate this MAC address.
Win2k PCs register with their DNS server via dynamic DNS. Don't know if Cisco devices support that. Don't think so.So, I guess you need some sort of network management software. If you have CW LMS, you might try to right a script to extract the data ...
