cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
659
Views
0
Helpful
1
Replies

issue while accessing links on portal

Hi,

Are there any special configuration steps to be taken in ACE configuration when we redirect users depending on url values?

we have our main website https://abc.com and it provides links to users for various applications.

If i go to https://abc.com and click the link xyz on it, i get back to main page again and current connections drops to 0. here my browser should be redirected to https://abc.com/xyz which is not happening.

But if i type in https://abc.com/xyz in browser, i go to correct page.

below is my configuration. please let me know if any other configuration is needed, Below config is with 2 links but actual production has many links.

I have similar issue for another application where links on main page can not be accessed. that application works on http  instead of https.

rserver redirect xyz

  inservice

  webhost-redirection "https://abc.com/xyz"

rserver redirect uvw

  inservice
  webhost-redirection "https://abc.com/uvw"

rserver host abc

ip address 1.1.1.1

inservice

serverfarm redirect xyz

rserver xyz

inservice

parameter-map type http case_param

  case-insensitive

  no persistence-rebalance

  set header-maxparse-length 65535

  set content-maxparse-length 65535

  length-exceed continue

parameter-map type ssl abc

  cipher RSA_WITH_3DES_EDE_CBC_SHA

ssl-proxy service abc

  key abc

  cert abc

  ssl advanced-options abc

serverfarm redirect uvw

rserver uvw

inservice

serverfarm host abc

rserver abc

inservice

class-map type http loadbalance match-any map1

   match http url "/xyz"

class-map type http loadbalance match-any map1

   match http url "/uvw"

policy-map type loadbalance first-match ssl-abc

class map1

    serverfarm xyz

class map2

    serverfarm uvw

class class-default

    serverfarm abc

class ssl-intranet

    loadbalance vip inservice

    loadbalance policy ssl-abc

    loadbalance vip icmp-reply active

    nat dynamic 1 vlan 368

    appl-parameter http advanced-options case_param

    ssl-proxy server abc

1 Reply 1

Cesar Roque
Level 4
Level 4

HI,

Try enabling persistence-rebalance, the parameter should look like this:

parameter-map type http case_param

  case-insensitive

  persistence-rebalance

  set header-maxparse-length 65535

  set content-maxparse-length 65535

  length-exceed continue

---------------------
Cesar R
ANS Team

--------------------- Cesar R ANS Team

Review Cisco Networking for a $25 gift card