Hi,
Are there any special configuration steps to be taken in ACE configuration when we redirect users depending on url values?
we have our main website https://abc.com and it provides links to users for various applications.
If i go to https://abc.com and click the link xyz on it, i get back to main page again and current connections drops to 0. here my browser should be redirected to https://abc.com/xyz which is not happening.
But if i type in https://abc.com/xyz in browser, i go to correct page.
below is my configuration. please let me know if any other configuration is needed, Below config is with 2 links but actual production has many links.
I have similar issue for another application where links on main page can not be accessed. that application works on http instead of https.
rserver redirect xyz
inservice
webhost-redirection "https://abc.com/xyz"
rserver redirect uvw
inservice
webhost-redirection "https://abc.com/uvw"
rserver host abc
ip address 1.1.1.1
inservice
serverfarm redirect xyz
rserver xyz
inservice
parameter-map type http case_param
case-insensitive
no persistence-rebalance
set header-maxparse-length 65535
set content-maxparse-length 65535
length-exceed continue
parameter-map type ssl abc
cipher RSA_WITH_3DES_EDE_CBC_SHA
ssl-proxy service abc
key abc
cert abc
ssl advanced-options abc
serverfarm redirect uvw
rserver uvw
inservice
serverfarm host abc
rserver abc
inservice
class-map type http loadbalance match-any map1
match http url "/xyz"
class-map type http loadbalance match-any map1
match http url "/uvw"
policy-map type loadbalance first-match ssl-abc
class map1
serverfarm xyz
class map2
serverfarm uvw
class class-default
serverfarm abc
class ssl-intranet
loadbalance vip inservice
loadbalance policy ssl-abc
loadbalance vip icmp-reply active
nat dynamic 1 vlan 368
appl-parameter http advanced-options case_param
ssl-proxy server abc
