cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
585
Views
0
Helpful
3
Replies

keepalive frequency issue

litouch
Level 1
Level 1

Hi guys,

I have one question, how soon can CSS detect the service status when one service gets down? From cisco.com, I learned that the frequency could be from 2 to 255.

Does that mean 2 seconds to 255 seconds? or check the service 2 times to 255 times in one second?

If check one time every 2 seconds, I think that's too long... may many request will be directed to a down service.

Thank you!

Ed

1 Accepted Solution

Accepted Solutions

Gilles Dufour
Cisco Employee
Cisco Employee

Ed,

the frequency is measured in seconds.

So 2 seconds is the minimum.

If you had 100 servers and you had to check them 10 times per second, you would need a CPU just for the keepalives.

Gilles.

View solution in original post

3 Replies 3

Gilles Dufour
Cisco Employee
Cisco Employee

Ed,

the frequency is measured in seconds.

So 2 seconds is the minimum.

If you had 100 servers and you had to check them 10 times per second, you would need a CPU just for the keepalives.

Gilles.

Got it. Thank you.

You know, I feel it's much better here than any other discuss sections in cisco.com. I always can find the right answer!

Ed

I'm glad you appreciate the answers you are getting here.

Gilles.

Review Cisco Networking for a $25 gift card