03-04-2002 02:50 AM
Hi,
I have LD with sticky cookie-passive and weighted load balancing over 3 servers.
It seems the weights of the 3 server are not respected.
Here are some displays :
LD_Prod# sh sticky
Virtual Machine(s) Sticky
virtualprod:80:0:tcp 240 cookie-passive tolsessionid
LD_Prod# sh weight
Real Machine(s) Weight Timeout
bfpctol3:80:0:tcp 4 never
bfpctol1:80:0:tcp 2 never
bfpctol2:80:0:tcp 2 never
LD_Prod# sh statistics
Real Machine(s) Bytes Packets Connections
bfpctol3:80:0:tcp 530221148 1673183 46326
bfpctol1:80:0:tcp 651629640 2068285 57703
bfpctol2:80:0:tcp 283775703 918391 26235
Note that bfpctol3 has a weight of 4 (doubles the other two server weights), but the number of connections does not shows this situation.
The three servers had been always up since last clear counters command.
Any idea ?
Thanks in advance.
03-11-2002 10:39 AM
Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
If anyone else in the forum has some advice, please reply to this thread.
Thank you for posting.
03-14-2002 03:13 PM
Keep in mind the weighted predictor makes its decision on current, instantaneous incoming traffic. The more traffic you send it the, better the results. Also, I would use the show real command to see the predictor at work. The show real displays the instantaneous connections to each server. The show statistics is the over all number of connections each has been given.
You might also want to consider using the "loaded" predictor. The loaded predictor assigns a weighted portion of connections to a server before moving to the next.
Link to predictor definition:
I hope this helps!
Gonzalo
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide