We have a CSM blade in a 6509, IOS 12.2(18)SXF7, CSM softvare version 4.2(7);
We'd like to create a serverfarm, where servers are checked for several ports and only considered as working when all probes succeed.
Although Cisco docs state that there should be a possibility to associate multiple probes with a serverfarm, I haven't managed to do so.
Here's what I've tried:
probe PING icmp interval 5 failed 10 receive 4
probe TCP-1234 tcp interval 10 retries 2 failed 25 port 1234
real name PROBE-TEST-R
health probe PING
health probe TCP-1234
but when trying to add the second probe, I get:
% You must first disassociate from probe PING.
Any ideas, how multiple probes could be implemented?
Go to Solution.
Configure them as probe under the serverfarm..not health probe.
View solution in original post