NM-CE-20 Content module - upgrade procedure and ftp help

[broberso]

Our netmodule has been successfully installed and working. Its currently running 4.2.3 and we would like to upgrade it the latest 5.1.9.5 rev. I cannot find a working procedure for doing this. When I attempt to ftp into the module's IP I get a error stating it can't set guest priviledges. When telneting into the module and doing a "DIR" I get: nothing. Anyone help me out? Is upgrading to the 5.x supported?

Brian

[Gilles Dufour]

To see if the version you want is supported with this hardware, check the release note

http://www.cisco.com/en/US/products/sw/conntsw/ps491/prod_release_note09186a00802664f0.html#wp107167

Looks like the 20G module is not listed.

However it is supported in 5.0.15

http://www.cisco.com/en/US/products/sw/conntsw/ps491/prod_release_note09186a0080234dcc.html#wp42371

The upgrade procedure is the same for any ACNS device.

So, follow the procedure described at :

http://www.cisco.com/en/US/products/sw/conntsw/ps491/products_configuration_guide_chapter09186a0080131e84.html#1041204

Regards,

Gilles.