Is there anyway for Keepalive to check the server CPU utilization as a way to determine if the service is dead or alive?Regards,Howard
Is there anyway for Keepalive to check the server CPU utilization as a way to determine if the service is dead or alive?Regards,Howard
Hi,We're CSS newbies here, need some suggestions in terms of best keepalive methods for Exchange Outlook over Web. We currently have couple exchange web servers behind a CSS 11503, We need to monitor the health of the services beyond port 80 and 443...
Hi all !I have a network topo described below: - LAN network connected to SW3550. - SW3550 connected to Cisco3735 by ethernet. - Cisco3725 connected to 2 external ADSL_MODEM to 2 different IPS for backup and loadbalancing purpose.links and routing...
All,Have a client that is configured on one of my CS-100's. The services are pretty standard, http keepalive nothing special. The content groups though and the type of balance is where i have a question. currently they havecontent group1vip address...
we have a csm card in a 6513. A small serverfarm is configured with two real server and the vserver is configured as well, pointing to that server farm. We have a sticky of 5 define with the vserver. When we bring down one of the web server it takes ...
Hi,Assuming the performance was good enough, would the below be a viable alternative to the CSS11501? I'm guessing it's the CSS's hardware architecture that bumps up the price?http://www.brainforce.com/eng/produkte/ina/ina_b100_cont_eng.htmhttp://www...
We use two redundant CSM-Modules with version 3.1(6). Now we have the need to check the content of a website in a probe configuration. The serveradmins shall have the possibility with a change of a value in the website bring up or down their server (...
My shop bought two CSS11501 from a local Cisco reseller to set up a web server farm for intranet applications. When I talked with the pre-sales technical people at the beginning, they told me that placement of the CSS is flexible and can be any poin...
I can virtually send any traffic with any port to the content engine to be cached through the wccp service-number command.I tried to use that feature to cache SMTP or POP3, however, it does not work.The TCP handshake is redirected to the CE through W...
I am pretty new to Content switching. I have a situation here at my office that I would need some help with.I have an existing 11050 box that I am replacing with a new 11501 running ver 7.2 (the 11050 runs 5.0) and an additional 11501 to be brought i...
Hi All,Currently we are using CSS11155 to load balance the traffic for our server farm. The diagram as follow:firewall (10.10.10.1/24) | |CSS11155 (VIP: 10.10.10.100/24, VLAN1: 10.10.10.254/24) | |Servers (Default Gateway: 10.10.10.1/24)Now I...
What are the pros and cons of using the ethenet management port for managing a CSS and using a normal ethernet port for managing a CSS.Is any functionality of CSS depends on Management ethernet port? Is connecting via local lan still an issue/require...
With using a CSG content service gateway in a mobile network can I configure an inactivity timer (without traffic the user is disconnected after xx minutes)thanks
Does ACNS 5.1.1 support authentication via LDAP with Windows 2003 servers? If not, does a newer version support that?Thanks. Thomas
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
03-06-2024 12:27 PM | ||
02-21-2024 04:21 AM | ||
10-04-2022 06:16 AM | ||
09-26-2022 11:58 AM | ||
09-13-2022 02:40 AM |