03-25-2004 09:12 AM
I have the following config: Internal LAN -->PIX-->2651xm with NM-CE-BP configured only for transparent caching.
I got a lot of request hits but only few bytes hits.
The miss reasons, for the vast majority, are suspicious_url, http_none_cachable_reply_status and has_pragma_no_cache.
I am using WCCP ver 2 and ACNS ver 5.1.1, transparent caching.
Anyone can tell me what is happening and something to try to fix it ?
03-25-2004 11:48 AM
Well, there is not a lot you can do with most of that. You can ignore client requests to get non-cached responses...
http client-no-cache-request ignore
--or--
http client-no-cache-request revalidate
You may get upset clients if you choode ignore, so revalidate is usually a good compromise.
You can also cache non-cacheable content using rules..
rule action cache-non-cacheable
Does that help?
-Steve
03-29-2004 05:21 AM
Entered the following:
http client-no-cache-request revalidate
rule enable
rule action cache-non-cacheable ttl hours 1 pattern-list 101 protocol http
rule pattern-list 101 dst-ip 0.0.0.0 0.0.0.0
With the 101 rule I intended to cache non-cacheable content received from *all* ip addresses [on the Internet, yes].
Is the syntax used correct ?
Regards,
Eduard
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide