06-24-2004 11:21 AM
I have a Netcache configured for transparent caching for port 80 and 443. The Netcahce IP is 164.72.49.253. We have a 6509, sup720 IOS. 12.2(17a)SX3, configured to redirect web-cache and 1 to the Netcache. Here is the config:
ip wccp web-cache
ip wccp 1
The 6509 interface that controls the subnet the netcache is on is configured thus:
interface Vlan1
ip address 164.72.49.131 255.255.255.128
ip wccp web-cache redirect out
ip wccp 1 redirect out
We have a PC on another subnet connected to the 6509 that we are using to test the config, and we can only get port 80 to be redirected to the Netchace. HTTPS port 443 never gets redirected. Service group 1 is configed on the Netcache as tcp port 443.
Here is the output of 'sh ip wccp':
ENGLAB-6513-Native#sh ip wccp
Global WCCP information:
Router information:
Router Identifier: 164.72.232.1
Protocol Version: 2.0
Service Identifier: web-cache
Number of Cache Engines: 1
Number of routers: 1
Total Packets Redirected: 3431
Redirect access-list: -none-
Total Packets Denied Redirect: 0
Total Packets Unassigned: 0
Group access-list: -none-
Total Messages Denied to Group: 0
Total Authentication failures: 0
Service Identifier: 1
Number of Cache Engines: 1
Number of routers: 1
Total Packets Redirected: 0
Redirect access-list: -none-
Total Packets Denied Redirect: 0
Total Packets Unassigned: 0
Group access-list: -none-
Total Messages Denied to Group: 0
Total Authentication failures: 0
ENGLAB-6513-Native#sh ip wccp 1 detail
WCCP Cache-Engine information:
Web Cache ID: 164.72.49.253
Protocol Version: 2.0
State: Usable
Redirection: GRE
Packet Return: GRE
Assignment: HASH
Initial Hash Info: 00000000000000000000000000000000
00000000000000000000000000000000
Assigned Hash Info: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Hash Allotment: 256 (100.00%)
Packets Redirected: 0
Connect Time: 00:33:23
ENGLAB-6513-Native#sh ip wccp web-cache detail
WCCP Cache-Engine information:
Web Cache ID: 164.72.49.253
Protocol Version: 2.0
State: Usable
Redirection: GRE
Packet Return: GRE
Assignment: HASH
Initial Hash Info: 00000000000000000000000000000000
00000000000000000000000000000000
Assigned Hash Info: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Hash Allotment: 256 (100.00%)
Packets Redirected: 2911
Connect Time: 23:37:29
What would cause the router to no redirect service-group 1 packets to the Netcache?
06-25-2004 01:21 AM
HI,
the IOS has some predefined service for WCCP. Give it a try using ip wccp 70 and define service group 70 for https on your netcache.
cheers,
Joerg
06-25-2004 03:26 AM
The sup720 does not support wccp yet.
The commands are available and some functionalities may work but currently the sup720 does not support wccp.
http://www.cisco.com/en/US/products/hw/switches/ps708/prod_bulletin09186a00801599bc.html
Regards,
Gilles.
06-25-2004 05:48 AM
Hi Gilles,
I missed that one :( But would it be possible to use a self customized wccp group in the way he described it or do i have to use the predefinied ones. I had trouble with selfdefined groups using ftp on a normal router. After i found out, that a certain wccp group is predefined it worked properly.
Cheers,
Joerg
06-26-2004 12:50 AM
FTP is a special case I would say due to its nature of a separate data/control channels.
I used self defined groups to intercept various tcp port and it always worked.
Another thing to check is if the router supports selfdefined groups - ie: the 3550 only supports webcache - nothing else.
Regards,
Gilles.
06-25-2004 08:59 AM
Thanks for info.
Do you know when WCCP will be supported on the Sup720?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide