cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
420
Views
0
Helpful
2
Replies
Beginner

Ports used between Central Manager and Waas

Hello,

     I need to know which ports I have to open in a firewall to register Waas ( in wccp) in Central Manager. I have seen that I only need to open TCP 443 port. Is it correct?.

 

    Thank you for your help and support.

 

Regards.

1 ACCEPTED SOLUTION

Accepted Solutions
Participant

Re: Ports used between Central Manager and Waas

Hi,

This is correct, check this out : https://community.cisco.com/t5/application-networking/what-ports-need-to-be-open-on-fw-for-waas-communication-urgent/td-p/2427248

 

However WCCP is not being used from/to Central Manager !

WCCP is being used locally for redirection, and will probably not go through a firewall ?

Otherwise you'll need to open for the WCCP establishment (UDP port 2048) plus (dependant upon redirection/return method) optionally GRE.

 

Best Regards

Finn

2 REPLIES 2
Participant

Re: Ports used between Central Manager and Waas

Hi,

This is correct, check this out : https://community.cisco.com/t5/application-networking/what-ports-need-to-be-open-on-fw-for-waas-communication-urgent/td-p/2427248

 

However WCCP is not being used from/to Central Manager !

WCCP is being used locally for redirection, and will probably not go through a firewall ?

Otherwise you'll need to open for the WCCP establishment (UDP port 2048) plus (dependant upon redirection/return method) optionally GRE.

 

Best Regards

Finn

Highlighted
Beginner

Re: Ports used between Central Manager and Waas

Hi,

 

      WCCP is used locally.

      Thank you for your help!!.

 

 

 

 

Regards.

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards