03-11-2012 12:28 PM
need to know the two probe statements differnce or the purposes.
1. under the Rserver
rserver host xxxxxx
ip address x.x.x.x
probe ping
inservice
2. under the serverfarm
serverfarm host XXXXXX
predictor leastconns
probe ping
rserver XXXXX
inservice
rserver XXXXX
inservice
Thanks in advance.
~EM
Solved! Go to Solution.
03-14-2012 02:29 AM
Hi,
There is no precedence. By default the probes have the OR logic. So if any of the probes fails ( rserver OR server-farm ) the rserver will be considered down. You can change this logic by configuring on rserver of serverfarm : fail-on-all. This will change the logic on the configured rserver or server farm only.
In the case of multiple probes per rserver/serverfarm
I didn't get "what exactly you ment by Layer4 health" ?
Regards
Dan
03-14-2012 01:16 AM
guys please advise on the above information.
03-14-2012 01:35 AM
Hi ,
A probe can be associeted with :
So in your case there is no difference.
Regards
Dan
03-14-2012 02:22 AM
Thakns Dan,
Pleaes which would be taken as a prescendence also advise what exactly you ment by Layer 4 health. here
Thakns
03-14-2012 02:29 AM
Hi,
There is no precedence. By default the probes have the OR logic. So if any of the probes fails ( rserver OR server-farm ) the rserver will be considered down. You can change this logic by configuring on rserver of serverfarm : fail-on-all. This will change the logic on the configured rserver or server farm only.
In the case of multiple probes per rserver/serverfarm
I didn't get "what exactly you ment by Layer4 health" ?
Regards
Dan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide