cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
978
Views
0
Helpful
2
Replies

Server load balancing onto itself

arthurlove
Level 1
Level 1

es fro forum.jpg

hi

I have a customer with 4710 that load balances inbound traffic onto 2 servers. this works

There is also a requirement for the servers that are load balnced to [what seems to me ] to load balance onto themselves and for other server on the same vlan to use the servers in the farm in a load balanced way.

driving me bonkers ......

any ideas ?

thanks

1 Accepted Solution

Accepted Solutions

Gilles Dufour
Cisco Employee
Cisco Employee

this is possible with client nat.

By nating the source ip , you trick the server to believe the connection comes from another device.

So, all you need is a policy to dynamically nat request coming in.

You add this new policy on the server side interface so that only requests coming from the servers are source nated.

Gilles.

View solution in original post

2 Replies 2

Gilles Dufour
Cisco Employee
Cisco Employee

this is possible with client nat.

By nating the source ip , you trick the server to believe the connection comes from another device.

So, all you need is a policy to dynamically nat request coming in.

You add this new policy on the server side interface so that only requests coming from the servers are source nated.

Gilles.

Thanks fro teh swift and accurate reply

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: