12-09-2009 09:32 PM
hi
I have a customer with 4710 that load balances inbound traffic onto 2 servers. this works
There is also a requirement for the servers that are load balnced to [what seems to me ] to load balance onto themselves and for other server on the same vlan to use the servers in the farm in a load balanced way.
driving me bonkers ......
any ideas ?
thanks
Solved! Go to Solution.
12-10-2009 01:55 AM
this is possible with client nat.
By nating the source ip , you trick the server to believe the connection comes from another device.
So, all you need is a policy to dynamically nat request coming in.
You add this new policy on the server side interface so that only requests coming from the servers are source nated.
Gilles.
12-10-2009 01:55 AM
this is possible with client nat.
By nating the source ip , you trick the server to believe the connection comes from another device.
So, all you need is a policy to dynamically nat request coming in.
You add this new policy on the server side interface so that only requests coming from the servers are source nated.
Gilles.
12-28-2009 11:20 AM
Thanks fro teh swift and accurate reply
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide