Show flows returns a prompt without any flows

jimanda1961 · ‎11-29-2005

CSS11503 running:

CSS11503# sh ver

Version: sg0710206A (7.10 Build 206)

Flash (Locked): 7.10 Build 206

Flash (Operational): 7.10 Build 206

Type: PRIMARY

Licensed Cmd Set(s): Standard Feature Set

When I display a show flows it doesn't return flows. This has happened twice, approx. 2 days after we have rebooted some of the servers that we have configured on the content switch. The only way that I have been able to recover this is to reboot the CSS11503. There hasn't been a change made to the CSS during this period. Any feedback would be helpful.

Gilles Dufour · ‎11-29-2005

go in llama mode and do 'flow-agent show active'

Do you see any flow ?

Is this a single box or is it working in redundant mode ?

I would also strongly recommend an upgrade to 7.40 or 7.50.

We don't really support 7.10 anymore.

Gilles.

jimanda1961 · ‎11-30-2005

We are running a single box. I understand that we should upgrade but until we can get a second box to put the new code on and test it is very difficult to do in our environment. Next time we have the issue I will see what your command outputs.