Good day,
Just like to find out what does the "ssl-server xxx cipher" command do? is it something to do with SSL module & web servers communication?
i have this command on my configuration but it seems that the CSS donot talk to the web servers properly.
!*********************** SSL PROXY LIST ***********************
ssl-proxy-list SSL-LIST01
ssl-server 100
ssl-server 100 vip address 10.180.6.1
ssl-server 100 rsakey RSAKEYASSOCIATION1
ssl-server 100 rsacert CERTASSOCIATIO1
ssl-server 100 cipher rsa-with-rc4-128-sha 10.180.6.1 80
active
!************************** SERVICE **************************
service DETDRSERVER01
ip address 10.180.6.35
port 80
active
service DETDRSERVER02
ip address 10.180.6.37
port 80
active
service SSL-MODULE01
type ssl-accel
keepalive type none
slot 3
add ssl-proxy-list SSL-LIST01
active
!*************************** OWNER ***************************
owner OWNER
content DRSERVERS-HTTP-RULE
vip address 10.180.6.1
balance aca
add service MYDRSERVER02
add service MYDRSERVER01
protocol tcp
port 80
active
content DRSERVERS-SSL-RULE
vip address 10.180.6.1
application ssl
protocol tcp
port 443
add service SSL-MODULE01
active
when i tried it from IE, I get the certificate but it doesn't connect to the web server homepage.
What is the command to see the traffic between CSS & web servers.
Any help appreciated.
Thanks.
