Three Vlans, wich ip will test the service?

[conectividade]

Hi, folks!

Our CSS11150 has 3 Vlans configured, with IPs 10.1.1.1-VLAN1, 10.2.2.2-VLAN2 and 172.16.3.3-VLAN3, after created and actived one service, this service receives test from VLAN1. You can see in server on VLAN3 the IP 10.1.1.1 doing the test of service. For any services on VLAN1, VLAN2 or VLAN3, always are receiving test from ip 10.1.1.1-VLAN1.

I would like that test could be done by VLAN2.

How could I change this situation?

Or better each test could be done by its own VLAN, server on VLAN1 only will receive test of ip 10.1.1.1;

servers on VLAN2 only will receive test from ip 10.2.2.2 ...

details:

cfg: - One Armed Configuration;

version: - ap0400003.

thank you in advance,

Renato

[skumar1969]

I am sorry I feel difficulty in understanding your question. Can you be bit more clearer. What do you mean by 'test' is that the keepalive polling does by the CSS every 5 sec?

[Gilles Dufour · Accepted solution]

Renato,

the CSS should use the local vlan to contact the servers.[ as you said vlan1 ip for server in vlan1, vlan 2 ip for servers in vlan2,...]

Since you are using a very very very old version, I can only recommend a software upgrade.

Regards,

Gilles.

[conectividade]

Gilles,

I will do this!

thank you,

Renato