Total time saved: is 0

[Dan Loring]

If I https to the management gui interface on one of our 274 devices and go to monitoring and select the CIFS tab, the total time saved is reading Zero.  This does not seem right because some of the other devices have a large number there??

[Bhavin Yadav]

Hi Dan,

You are using https which is optimized as TFO only by default. This means, you may not get a good / heavy optimization on it. To better optimize https, you may want to enable SSL AO.

Here is the process:

Configuring SSL Acceleration

Hope this helps.

Regards.

PS: Please mark this Answered, if this answers your question.

[Dan Loring]

If I go into the CM My wan > Devices > 274 device and go to Acceleration and enabled features and SSL Accelerator is checked off on all of the devices, but only one device outside of the datacenter wae is showing 0, when you connect to the actual device go down under cifsA0 and select monitoring.  Is there a command that I can run in a terminal session to see if it is actually running on the devices??

I have attached a picure of what I am referencing.

[Bhavin Yadav]

Ok this is different than what I was thinking. Let me look into more details and update you tomorrow.

Thanks.

[Bhavin Yadav]

Hi Dan,

Sorry for the delay.

1. But looking at your issue, is this only related to CIFS? I mean, does it show up all the other statistics?

2. Further,can you look at the CM and find out if it shows up on CM?

3. If CM is also showing "0", any idea when it stopped pushing this to CM / WAE itself?

3. Is this really optimizing CIFS in both directions?

4. Do you see any alarms on this WAE? - show alarms OR sh alarms hist det

I am sure this information help us to point the problem. it seems like we have some reporting / statistics issue with this WAE. Have you done anything to correct this issue (like reloading, etc)?

Thanks.

[Jan Rockstedt]

Dan,

Not sure what version you are running.

But try this URL http://docwiki.cisco.com/wiki/Cisco_WAAS_Troubleshooting_Guide_for_Release_4.1.3_and_Later_--_Troubleshooting_the_CIFS_AO

Jan