Trying to run CSS11503 08.10.0.02 one-armed DNAT+SNAT with UDP 921

[casablancag]

Is there a way to perform DNAT + SNAT and portmap disable on the CIsco CSS 11503. I need to do a DNAT in a one-armed configuration and the to SNAT for UDP traffic with SRC Port 9211 and DST Port 9211. I don't need loadbalancing but only NAT. Is there a way to solve this issue with ACL. Any help will be appreciated...

Thanks

[Gilles Dufour]

if you want to do DNAT, you have to it a content rule.

The vip will be nated to the service address.

Then you need a group to nat the client ip.

Finally, you need to use the command 'portmap disable' under the group to avoid port mapping.

Gilles.