cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

895
Views
0
Helpful
4
Replies
Highlighted
Beginner

unable to connect Virtual Blade with VNC

Hi

I have WAVE-294 (4.4.7) with licence for virtual blade .

on this wave 1 virtual blade is configured with following parameter:

virtual-blade 1

description w2008

device cpu qemu64

device nic rtl8139

device disk IDE

device keyboard fr

memory 2048

disk 51

interface 1 bridge-group 1 mac-address 00:21:D8:AB:62:EB

cpu-list 1

boot cd-image disk /local1/vbs/winserver.ISO

boot from disk

autostart

exit

the virtual blade is running:

WAAS-FR-COG-CATS-WAVE294-1#sh virtual-blade 1

virtual-blade 1

config:

description w2008

device cpu qemu64

device nic rtl8139

device disk IDE

device keyboard fr

memory 2048

disk 51

interface 1 bridge-group 1 mac-address 00:21:D8:AB:62:EB

cpu-list 1

no boot fd-image

boot cd-image disk /local1/vbs/winserver.ISO

boot from disk

autostart

state:

running

serial console session inactive

vnc server active

no vnc client connected

current cd /local1/vbs/winserver.ISO

current floppy [not inserted]

But with ultraVNC i try to connect vitual blade with destination x.x.x.x:1 (@ip addresse of mgt wave in BVI

you have idea???

best regards

Everyone's tags (4)
1 ACCEPTED SOLUTION

Accepted Solutions
Enthusiast

unable to connect Virtual Blade with VNC

If you have not already installed the OS your boot from statement should be boot from cd-rom not boot from disk.

pdi-594-rtp(config)#virtual-blade 1

pdi-594-rtp(config-vb)#boot from cd-rom

pdi-594-rtp#virtual-blade 1 stop 0

pdi-594-rtp#virtual-blade 1 start

Try changing that parameter and restarting the VB.  Then launch VNC to your BVI address:0

View solution in original post

4 REPLIES 4
Enthusiast

unable to connect Virtual Blade with VNC

If you have not already installed the OS your boot from statement should be boot from cd-rom not boot from disk.

pdi-594-rtp(config)#virtual-blade 1

pdi-594-rtp(config-vb)#boot from cd-rom

pdi-594-rtp#virtual-blade 1 stop 0

pdi-594-rtp#virtual-blade 1 start

Try changing that parameter and restarting the VB.  Then launch VNC to your BVI address:0

View solution in original post

Beginner

unable to connect Virtual Blade with VNC

HI

on wave294 no DVD-ROM is present...therfore only boot from disk is possible...

Best regards

Beginner

Re:unable to connect Virtual Blade with VNC

I try to connect with tinyvnc and with this client the message is no bootable disk......
Strange the disk is OK on physical machine.

I try with différent ISO:

2003 32b

2003 64b

2003 SP1

2008 R2 32 and 64

2008 32 and 64..

same result....=>

If you have a idea....

best regards


Sent from Cisco Technical Support Android App

Beginner

Re:unable to connect Virtual Blade with VNC

Hi Michael,

after some times, i could retest the virtual blade on teh wave, and the goog configuration is :

virtual-blade 1

description w2008

device cpu qemu64

device nic rtl8139

device disk IDE

device keyboard fr

memory 2048

disk 51

interface 1 bridge-group 1 mac-address 00:21:D8:AC:10:38

cpu-list 1

boot cd-image disk /local1/vbs/windows2008R264.iso

boot from cd-rom

no autostart

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here