Hi i tried to install SM-SRE-700-k9 module to cisco 2911 router , but fail to load IOS , when i am loading the IOS getting following error
Router#$ install url ftp://10.0.0.2/waas-accelerator-4.4.3c.9-k9.bin
Delete the installed Cisco Wide Area Application Services Software and proceed with new installation? [no]: yes
Loading waas-accelerator-4.4.3c.9-k9.bin.install.sre !
[OK - 1754/4096 bytes]
Welcome to the WAAS installation checking resource requirements now
Resource check complete proceeding with installation
Router#
*Mar 18 08:56:37.999: %SM_INSTALL-6-INST_RESET: SM1/0 is reset for software installation.
*Mar 18 08:57:34.059: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration Request
*Mar 18 08:57:34.063: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP File Request
*Mar 18 08:57:35.795: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP File Request
*Mar 18 08:57:56.851: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP File Request
*Mar 18 08:57:56.983: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP File Request
*Mar 18 08:59:59.147: %SM_INSTALL-6-INST_PROG: SM1/0 PROGRESSING: Starting to install waas-accelerator-4.4.3c.9-k9.bin ....
*Mar 18 08:59:59.239: %SM_INSTALL-6-INST_PROG: SM1/0 PROGRESSING: SRE bootloader upgrade not required ....
*Mar 18 08:59:59.239: %SM_INSTALL-6-INST_PROG: SM1/0 PROGRESSING: Initiating FTP download....
*Mar 18 08:59:59.239: %SM_INSTALL-6-INST_PROG: SM1/0 PROGRESSING: now downloading waas-accelerator-4.4.3c.9-k9.bin ....
*Mar 18 08:59:59.955: %SM_INSTALL-6-INST_FAIL: SM1/0 is reset due to FTP install error. Failure return code: 92 .
[Resuming connection 1 to 10.101.95.100 ... ]
ServicesEngine boot-loader> boot chainloader
got meta list size: 2, 23, 70, 587
file opened: (hd1,1)+1, -1, -1
file closed: (hd1,1)+1
file opened: (hd1)1+255, -1, -1
file closed: (hd1)1+255
Verifying ... done.
Starting Kernel.
GNU GRUB 0.95 built Mar 2 2010
[BOOT-PHASE2]: Executing default_bootrom
[BOOT-PHASE3]: version 1, built Dec 15 2010
[BOOT-PHASE3]: NO RESCUE IMAGE FOUND ON FLASH
[BOOT-PHASE3]: default system image is 1 sectors
[BOOT-PHASE3]: extracting system image at 0x2000000
checksum: bzimage_start (2000400) + hdr->bzimage_len (6575652) - sysimgaddr (20
00000) > nr_bytes (131072)
[BOOT-PHASE3]: SYSTEM IMAGE CORRUPT!
[BOOT-PHASE3]: LOADING RESCUE IMAGE
[BOOT-PHASE3]: run_rescue: sorry, no rescue image on your boot device
[BOOT-PHASE3]: PANIC, halting.
[BOOT-PHASE3]: Contact Cisco Technical Support
Can somebody help!!!!!!!!!!!!!!
