cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1684
Views
0
Helpful
5
Replies

WAAS Management

garry cordess
Level 1
Level 1

                   Hello,

In a scenario where we use a WAAS appliance as a management box for the other WAAS's is there any reason why a small box i.e. WAVE-274 shouldn't be used to manage several big boxes i.e. WAVE-574?

Thanks,

Garry.

2 Accepted Solutions

Accepted Solutions

John Gaskell
Level 4
Level 4

absolutely. In fact I would say that is the normal scenario. Even a small WAAS device can manage many large devices when in CM mode.

John

If this is hekpful, please mark as Answered or Helpful.

View solution in original post

The official line (if you want support, etc) is a CM is essemtial.

If you just want to tinker with a couple of devices in a lab, and just love the commend line, then physically it would work without a CM. But it would be unsupported.  

John

If this is hekpful, please mark as Answered or Helpful.

View solution in original post

5 Replies 5

John Gaskell
Level 4
Level 4

absolutely. In fact I would say that is the normal scenario. Even a small WAAS device can manage many large devices when in CM mode.

John

If this is hekpful, please mark as Answered or Helpful.

Hi John,

Ok thanks that does sound like the right thing to do.

Many thanks,

Garry.

Hi,

So having a management WAAS is essential or an option?

Regards,

Garry.

The official line (if you want support, etc) is a CM is essemtial.

If you just want to tinker with a couple of devices in a lab, and just love the commend line, then physically it would work without a CM. But it would be unsupported.  

John

If this is hekpful, please mark as Answered or Helpful.

Hi John,

Ok thought so, many thanks for the response.

Regards,

Garry.

Review Cisco Networking for a $25 gift card