Hi,
I have a waas deployment. I have a WAE512 as Manager, and other as accelerator (working in in-line mode) in the central site.In the remote office, i have a 2811 ISR with a NME-WAE-502 (with wccp mode).
From the Manager, i can see the 2 WAE's (WAE512 and NME502), and it's ok!
When i tried to do a FTP file transfer with WAAS turn on, on the Manager i can see the connection and the applied policies (TFO, DRE, LZ). And i can see the graphics, the real traffic versus the optimized traffic, and the optimized traffic percentage. and it's ok!!!
But when you see the real time that spent the file (size file = 7MB) to transfer from de central site to the remote site, you see that the transfer latest 5 minutes. it's not ok!!
If i turned off the waas, and do the same transfer, the transfer latest just 20 seconds.
So My question is: Why do i get this result? , what is wrong?
The versión of waas is 4.1.1.c in all the WAE's.
The config of the central WAE accelerator (in-line mode)is:
WAAS version 4.1.1c (build b16 Nov 5 2008)
!
device mode application-accelerator
!
!
hostname WAE-CORE
!
clock timezone CST -6 0
!
primary-interface GigabitEthernet 1/0
!
interface GigabitEthernet 1/0
ip address 132.247.196.100 255.255.255.0
no autosense
bandwidth 100
full-duplex
exit
interface GigabitEthernet 2/0
shutdown
exit
!
interface InlineGroup 1/0
inline vlan all
no autosense
bandwidth 100
full-duplex
exit
interface InlineGroup 1/1
inline vlan all
shutdown
exit
!
!
ip default-gateway 132.247.196.254
!
no auto-register enable
!
! ip path-mtu-discovery is disabled in WAAS by default
!
ntp server 132.247.251.245
!
central-manager address 132.247.197.1
cms enable
The config of the NME-WAE502 AND ROUTER 2811:
ip wccp 61
ip wccp 62
!
!
ip cef
!
interface Loopback0
ip address 111.111.111.111 255.255.255.0
!
interface FastEthernet0/0
description LAN
ip address 132.247.195.1 255.255.255.0
ip wccp 61 redirect in
duplex full
speed 100
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/3/0
description Enlace WAN
bandwidth 2000000
ip address 132.247.194.1 255.255.255.0
ip wccp 62 redirect in
fair-queue
clock rate 2000000
!
interface Serial0/3/1
no ip address
shutdown
clock rate 2000000
!
interface Integrated-Service-Engine1/0
ip address 10.0.0.1 255.255.255.0
ip wccp redirect exclude in
service-module ip address 10.0.0.100 255.255.255.0
!Application: Restarted at Thu Apr 29 15:56:29 2010
service-module ip default-gateway 10.0.0.1
no keepalive
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 132.247.194.2
--------------------------------------
hostname NM-WAE-502
primary-interface GigabitEthernet 1/0
interface GigabitEthernet 1/0
ip address 10.0.0.100 255.255.255.0
no autosense
bandwidth 1000
full-duplex
exit
interface GigabitEthernet 2/0
shutdown
exit
!
ip default-gateway 10.0.0.1
!
no auto-register enable
!
! ip path-mtu-discovery is disabled in WAAS by default
!
ntp server 132.247.251.245
!
!
wccp router-list 1 10.0.0.1
wccp tcp-promiscuous router-list-num 1
wccp version 2
!
egress-method negotiated-return intercept-method wccp
!
central-manager address 132.247.197.1
cms enable
i'm not sure, if the wccp config that i applied on the NME-WAE502 is correct. and could be the source of my problem.
Someone can help me?
thanks a lot!!
