08-12-2009 07:23 AM
What does the output "Cache: Status: Temporarily Failed" indicate?
What else should I be looking at when I receive this message?
Thank you!
-Ryan
08-12-2009 07:57 AM
Hi Ryan,
I have a couple of questions:
1. What version of WAAS are you running?
2. Have you recently changed the amount of the memory in the WAE?
Regards,
Zach
08-12-2009 08:00 AM
Thank you Zach!
It is running 4.1.3b and no, I have not recently upgraded the memory, but when I did, I cleared the DRE cache.
Should I do this again after the 4.1.3b upgrade?
-Ryan
08-12-2009 08:02 AM
Thanks for the reply.
Can you check syslog.txt for any "%WAAS-RE" messages?
If there was a change in the WAE memory configuration, I suspect you may be running into CSCsy47235.
Regards,
Zach
08-12-2009 09:54 AM
Zach,
That was exactly it. Resolved. Thank you again!
-Ryan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide