cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
403
Views
0
Helpful
1
Replies

WAAS - WCCP redirect inbound

johng231
Level 3
Level 3

Hello Everyone,

I notice on our 1841 router running version 12.4(22)T, the wccp redirect inbound method does not process through CEF. It will only process it through an outbound redirection. The 61 redirect inbound is applied to the subinterface on fas 0/0.

Any ideas ?

interface FastEthernet0/0.999

description ****Dublin User Vlan****

encapsulation dot1Q 999 native

ip address x.x.x.x 255.255.255.192

ip helper-address 134.65.181.11

no ip redirects

no ip proxy-arp

ip wccp 61 redirect in

ip wccp 62 redirect out

ip flow ingress

no ip mroute-cache

service-policy input DBN_LAN

1 Reply 1

vmoopeung
Level 5
Level 5

You must configure these devices to use WCCP Version 2 instead of WCCP Version 1 because WCCP Version 1 supports web traffic (port 80) only. When you enable the TCP promiscuous mode service (WCCP Version 2 services 61 and 62) on a WAE and a router, you do not need to enable the CIFS caching service (WCCP Version 2 service 89) on the router or WAE.

http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v401/quick/guide/wsqcg401.html#wp1357416

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: