08-13-2013 05:44 AM
Hello everyone!
Is it possible to change inline ports wan/lan assignments in inline group on WAVE 694/WAVE 7571 with 4/8 port copper gigabit ethernet inline module through telnet or Central Manager?
Can any problems occur if cords were plugged in wrong ports (from local switch to inlineport wan (inlinegroup 1/0 0) ; from ISP provider to inlineport lan (inlinegroup 1/0 1)?
Solved! Go to Solution.
08-13-2013 07:54 AM
Hi Igor,
As far as I remember it doesn't really matter where you connect the WAN and LAN cable, if the card is in inline mode.
Regards,
Leo
08-13-2013 07:54 AM
Hi Igor,
As far as I remember it doesn't really matter where you connect the WAN and LAN cable, if the card is in inline mode.
Regards,
Leo
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide