What happen when SSL daughter card fails?

[andrea.meconi]

I'm using two CSM with SSL duaghter card with redundancy.

What happen if the card fails? CSM fails too?

Thanks.

Andrea

[mchin345]

When the SSL daughter card failure is detected, the SSL daughter card is restarted causing all SSL flows to fail, and they will need to be re-established.

During a supervisor engine switch over, the standby CSM-S fails to initialize and the new standby supervisor engine prints the following message for all CSM-S ports:

%PM-STDBY-4-INT_FAILUP:GigabitEthernet7/2 failed to come up.No internal VLAN available

[andrea.meconi]

Thanks.

But I don't understand if when SSL card fails, CSM fails too; so active CSM becomes standby.

Regards.

Andrea

[Gilles Dufour · Accepted solution]

The CSM will most of the time fail as well.

Gilles.