Welcome to the Cisco Networking Professionals Ask the Expert conversation. This is an opportunity to learn how to troubleshoot Nexus 5000 & 2000 series with Lucien Avramov. Lucien is a customer support engineer at the Cisco Technical Assistance Center. He currently works in the data center switching team supporting customers on the Cisco Nexus 5000 and 2000. He was previously a technical leader within the network management team. Lucien holds a bachelor's degree in general engineering and a master's degree in computer science from Ecole des Mines d'Ales. He also holds the following certifications: CCIE #19945 in Routing and Switching, CCDP, DCNIS, and VCP #66183.
Remember to use the rating system to let Lucien know if you have received an adequate response.
Lucien might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Security discussion forums shortly after the event. This event lasts through March 11, 2011. Visit this forum often to view responses to your questions and the questions of other community members.
I need info concerning how to wire a dc cable for ASR9000 V-2, dc power shelf . I need a photo of the DC DSUB 2 POLE CONNECTOR our any other info as to make clear where the - 48VDc wire is connected at the panel connector . At the ...
This is about VMware ESX (.ova) based deployment with 3 Data Nodes and 3 App Nodes. Nexus Dashboard v2.1(2d), Fabric Controller v12.0.2f.
I am trying to upgrade image using Nexus Dashboard Fabric Controller but it keeps failing with below erro...
Nexus 93180YC-FX3 switches contain an "GNSS" LED at their front
* which is not part of the documentation (hardware installation guide for example)
Since "feature frequency-synchronization" has to be licensed (DCN SyncE Add-On License)* GNSS seems t...