04-07-2014 06:31 AM
Hi.
I know this was asked for in 2011 (OSD status indiactors), but i was wondering if it is now possible to activate the limited OSD mode that is shown when using Cisco Touch, or at least simulate that a Cisco Touch panel is paired to activate the limited OSD mode? Does it exist any documentation for the pairing process? This is for Crestron Integration.
- Vidar Hauglien
Solved! Go to Solution.
10-07-2014 10:42 AM
This might be possible with the following command:
xConfiguration Experimental SystemUnit MenuType: <Auto, Indicators, Interactive>
However if you enable it to use "indicators", it will display the following on the codec if no touch panel is used.
Connection with the touch screen is lost
> Ok
> Unpair and restart
If you want to use this, you might want to contact your Cisco Account Manager and see if they can open a feature request to disable the touch panel warning. I know they did this for the new SX80 when anyone would like to use it with an external control system such as Crestron or AMX.
04-11-2014 03:45 AM
Hi Vidar,
You can find the related documentation here -
https://developer.cisco.com/site/collaboration/telepresence/av-integrator/home/
04-11-2014 04:02 AM
Hi.
This is not in the documentation, that is why i ask here.
- Vidar
10-07-2014 10:42 AM
This might be possible with the following command:
xConfiguration Experimental SystemUnit MenuType: <Auto, Indicators, Interactive>
However if you enable it to use "indicators", it will display the following on the codec if no touch panel is used.
Connection with the touch screen is lost
> Ok
> Unpair and restart
If you want to use this, you might want to contact your Cisco Account Manager and see if they can open a feature request to disable the touch panel warning. I know they did this for the new SX80 when anyone would like to use it with an external control system such as Crestron or AMX.
10-09-2014 01:08 AM
Thanks! This is exactly what i was after.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide