09-30-2016 11:44 AM - edited 03-01-2019 04:31 AM
We are in the process of setting up APIC-EM and are testing the PnP feature. Currently I have a c2960+24tc-l running 15.2(2)E setup on the test bench plugged into a DHCP port. After boot is reaches APIC-EM and is listed as an "unclaimed" device". When I try to claim it and push a new IOS image to it the following error occurs:
Any help would be appreciated.
Solved! Go to Solution.
10-02-2016 08:55 PM
Hi Marcus,
Can you also verify the time it takes to download the image to the 2960x. Are you doing this over the WAN or a LAN connection.
i think you need to be running 15.2(2)E3 as that is the first version that is supported. can you try with that image?
Adam
09-30-2016 11:48 AM
Hi Marcus,
do you have "aaa command authorisation" in your configuration?
Adam
09-30-2016 11:59 AM
At this current test i'm not pushing a config just the IOS image
09-30-2016 12:05 PM
ok. Is it 12.2(2)E3 that you are running? 12.2(2)E3 is the min supported version in the release notes.
which version are you upgrading to?