cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
6605
Views
1
Helpful
19
Replies

IP Device Tracking

TID_Orion
Beginner
Beginner

I have configured APIC-EM in stand alone mode and have discovered a majority of my network devices. On many of these devices, I am unable to view host information within the APIC console. Port information is gathered successfully. I have verified that IP device tracking is working and a "show ip device tracking all" lists all of my connected hosts on the switch. Any reason why APIC will not pick this up? Many thanks in advance!

19 Replies 19

Thank you for your response. My issue is not with these CDP clients, but with computers connected to the switch. On the switch, IP device tracking lists all of the hosts, but the APIC does not.

Some additional info:

Most hosts exist behind a ShoreTel phone

The ShoreTel phones speak LLDP

I hope that this helps. Thanks!

Do you know IPs for those computers ?

Yes, the switch that I provided device tracking details earlier does not display any connected hosts on APIC. You can choose any IP from that list but the range 192.168.38.100 - 192.168.38.120 specifically includes computer hosts. Some sample active IP addresses include:

192.168.38.110

192.168.38.111

192.168.38.112

Thank you!

So looks like this is an issue in this release but will be addressed in 1.2.

TID_Orion
Beginner
Beginner

Ok. I will wait for that release. Thank you for all of your help!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers