Cisco Bug Discussions

hi, I have a cisco ISR4321/K9 router with isr4300-universalk9.16.06.03.SPA image. I am seeing the same logs which seems to be the same bug.    "Aug 21 07:20:51: %IOSXE-5-PLATFORM: SIP0: cpp_cp: QFP:0.0 Thread:000 TS:00000315333290006059 %PUNT_INJECT-...

I am facing the exact same issue here, I cannot submit a service, the difference is that , my service name doesn't have an apostrophe on the name, so I do not know what I am doing wrong.

I recently upgraded IOS-XR code from 5.3.3 to 5.3.4 and now receiving the following message during reboot or power on cycle: RP/0/RSP1/CPU0:Jun 16 05:26:24.631 : licmgr[316]: %LICENSE-LICMGR-4-PACKAGE_LICENSE_INVALID : Package requesting A9K-LI-LIC l...

Hi, regarding to our Case...The workaround "restart the node" is not correct or incomplete. First you need passwords with a maximum of 29 characters.And in our scenario after we set the password, the databases gone green again but on our IMP publishe...

I would not say that there is "Workaround: None" for this. We just installed a new 3540 WLC (anchor) to replace existing 2504 WLC. The SNMP Trap logs was filling up with "Failed to authorize AP with Base Radio MAC Authorization entry does not exist i...

Hello! Has anybody solution to fix broken CMS recordings (.temp files) to the playable .mp4 format?

How am i suppose to convert 12.5(1)MN515 to download page ? what SR version should i relate it against ? I have currently 12-5-1-16 applied. Please advice.Suggest me any documentation that i can refer to understand these release version better. Thank...

Hi,   we're on Version 11.5.1-124 for Web on a S390 and still get the error "Validation Error : Certificates signature verification failed." when we try to install a valid certificate from our own CA in the cli.   Regards, Andreas

9.8(4.7) is not available to donwload ....?

Hi, I have the issue on an ASA running on a 2110 plattform. Why the solution is on a firmware for 5500-X plattform? regards,

After further troubleshooting this issue with my colleague, we found the best solution is to factory reset the AP back to default and let it associate back to the controller (assuming you have option 43 enabled).  This will allow the AP to download t...

Test it on v12.1.0-071, it is found ironport can use "sender" to sign if we have env from, header from and sender. It is bug fixed on 12.1.0-071?

Will virtual templates ever be allowed to support zone base firewall?!?

Hi   Today I have a problem with ASA5505 which I can't access via ASDM. The error show "ASDM did not get a response from the ASA in the last 60 seconds. Please check the configuration and your connection and then try again by clicking refresh". I cou...

Having this same issue on HA 2140's running 6.2.3.9.