Could you please let me know if this image is affected . we are useing Cisco ASA with Version 8.2(5) 55 . 2nd. if the vulnerable condition doesn't match with our device is there any need to upgrade it ??
Community: I am looking for a workaround to this solution. Unfortunate I believe the best I can do use shut down a complete side. Enterprise WAN has interruption's, In this scenario construction cut a fiber line, WAN down a few seconds until re-route...
Hi, I have two ASAs. (9.6.(1) and 9.4.(2)11). According to the article, I can see only three versions of ASA affected by this bug. Then can I ignore this bug since my ASAs do not have below versions? or do you recommend to upgrade ASA? Thanks.
...
I am confuse for this bug.
My ASA 5510 Version is
Cisco Adaptive Security Appliance Software Version 9.1(7)13Device Manager Version 7.7(1)
Webvpn is enable on my outside interface.
I am using Cisco ASA 5510 pair.
I can see 9.1(7.20) is in fixed ...
Hello,
I have been looking for the ASA software asa963-20-smp-k8.bin.
On the download page I can only see asa963-1-smp-k8.bin
Can anyone supply the correct url or location for download?
regards,
Brian
*** Sorry for the post, I have located the...
Hello,
Please I have Jabber clients(phone, PC...) with CUCM 10.5.2.10000-5, but doest not work: Meet-Me (inicialization). what is needed to make it work Meet-Me?
I am using Cisco ASA 5510 and the running version is 9.1(7)13. It has HA pair, Active- Standby.
I need to upgrade it with 9.1(7)20 because of the bug.
Can some one let me know the procedure for the upgradation from 9.1(7)13 to 9.1(7)20 with zero down...
This is a big issue here when German Windows Servers are involved (Domain = Domäne).
We are encountering this since 6.1 - now we have upgraded to 6.2.2 - still the same.
Is there any information in which version this will be fixed?
Could someone please advise as we are using ASA 5555 and 5585 and running 9.6.3.1, i like to know if the fix is available 9.6.3.20 if so how to get and installed.....
I have a customer completing an upgrade to 11.6, and we have installed the Studio 11.6 and there is no SAB directory under the Cisco or CallStudio directories. Any thoughts?
Following the webvpn critical security notification is ASA version 9.9 which we use since december also affected. According to Cisco's reference is the first fixed version 9.9.1.2 which isn't available for download (yet). The only version is 9.9.1 it...
Can't all webvpn configuration be removed while still allowing the AnyConnect client? I realize some functions like distributing client via ASA would be lost but the AnyConnect functionality for existing clients would continue to function, no?
