Cisco Bug Discussions

if no action is taken, such as deleting those .bin files or upgrade to 16.5.1a, what will happen to the switch?

Getting the below error while configuring dynamic NAT on SVI. 2017 May 23 14:08:08 <Hostname> %AFM-3-AFM_VERIFY_FAIL: Access control policy modification on vlan 50 failed 2017 May 23 14:08:08 <Hostname>last message repeated 7 times 2017 May 23 14:08:...

For 11.5 version, it states it is fixed on 11.5(1.13038.1). However, from the CCO download site, CUCM only has 11.5.1.12900-21 "i.e. 11.5(1)SU2". Anyone knows when 11.5(1.13038.1) will be launched?? thanks.

This seems like a big step backwards moving from CME to CUCM when blind transfer return is not even an option on CUCM.  Please consider this feature. (Agree that attendant console software, if a work around, is an issue with "rds/terminal server" en...

Hello, I am wondering if the version 6.2.6 on N7Ks is vulnerable? According to this link, the first fixed release is 6.2.16 and hence, 6.2.6 is vulnerable: https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20161005-nxaa...

Hi All Is this bug in 8.2.151.0 really solved? I still have completely wrong client count numbers on PI 3.1 P6 . ThanksPatrick

According to the following link, it states the issue has been fixed. However my RV220w is on firmware 1.0.7.2 and still experiencing this issue. Anyone else have a similar issue? Any suggestions on how to go about resolving this?  https://bst.cloudap...

I got the error message on version 03.03.04SE.

hi all, i've setup new ironport licenses, everything is fine except for "bounce verification" that is in a "dormant" state. Can you please help me? Thanks

Hi, I have install and configured some switches with software versión 3.6.6E that is now suggested Cisco versión and data from 23-DEC-2016 What is the recommended version for switches affected with this bug? 3.7(3)E data from 15-JAN-2016 and 3.6(4...

CSCuy76780 Unable to associate client with wlan wpa2+mac filtering+webauth config https://bst.cloudapps.cisco.com/bugsearch/bug/CSCuy76780 Does this problem also apply to  CT5508 OS 8.2.151.0 ?

Good afternoon., Nexus doesn't boot after upgrade to 6.0.2.U6.7 from release older than 6.0.2.U6.2 Someone has procedure to solve this problem please. Thanks and regards.,

I need to standardize more than 200 Routers and Switches and keep all devices with same model running on same IOS code. Inventory of all devices and running code is already extracted, but do I need to check each and every running IOS model and compa...

Actually, this is not a Cisco bug. Polycom are supporting it from their RPRM only, and in Dynamic mode only.