Is there a reason why Cisco doesn't add this code/fix 7.6.130.13 to their main downloads for the 5508 WLC? I need to get this again and most likely need to resubmit a ticket just to get a link to download.
Use the following config on the interface vlan that is going to broeadcust the ntp for exampleint vlan 15ntp broadcast destination <...ip address of client switch management vlan..> ! create acess list for Ntp peer group and allow the client side sw...
Hi guys,Can someone clarify or explain how to apply the UCCX COP file which addresses CSCur02861 issue?I've downloaded the COP file and the release notes from Cisco downloads. In the release note, it says 'For instructions on applying the patch, see ...
Hi Team, I would like to know the status of the bug filed to place the information about the restriction of snmp-server host to 10 numbersin NX-OS switches. I have noticed that the following information was still not updated in the document . please ...
Hi everyone. I have a 5K running version 5.1(3)N2(1b) and I am pretty sure this version is vulnerable to the GNU Bash Environment Variable Command Injection Vulnerability- Advisory ID: cisco-sa-20140926-bash. What is the recommended version to allevi...
Hey Guys,i´m having a strange bug when i want to use the AnyConnect VPN software: when i want to type in my login the program immediately closes without an error message or something when the character "@" is typed in. I also tried using the screen k...
I've got a problem with the Catalyst 2960 / 24TCL switch. The Flash-directory was empty. After I copy with xmodem the firmware bin-file into the flash-directory and installed it .. I miss the HTML-Directory. Can somebody tell me how I can get it back...
Hello allCisco has stated a severity of moderate to this bug, but I do not agree. After a reboot , the configuration that is loaded is the one that is stored in the startup config because of this, the privilege commands do not work anymore. So this b...
While it has been confirmed that Nexus 3K, 5K, and 7K hardware "support" only the 2-step PTP sync method, there are two serious problems with the code as it stands.First, NX-OS fails to ignore the unsupported 1-step method and erroneously accepts and...
Hello everyone,I am working on Cisco packet tracer and now I just see that I have set up a server, but when I click on the Desktop tab and Config Server, an error window appears: Error << Device must be powered on. >> I know that the device must be s...
Hi! Our two 6509s got struck by this bug a week ago and we had an entire day of outtage before managing to get the workaround implemented. We have analyzed the Netflow-data we have and see no sign of repeated or consistent mDNS traffic, neither unica...
