CSCug28911 - NSR state discrepancy between summary and full command output
I see where this is applicable to 4.3.x code... but why would this still be showing up in 6.3.3 code?
asr9k-k9sec-supp, V 6.3.3[Default], Cisco Systems, at disk0:asr9k-k9sec-supp-6.3.3 Built on Tue Aug 28 18:31:48 EST 2018
RP/0/RSP1/CPU0:CORE-02#sh redundancy Tue Jan 22 08:52:36.407 EST Redundancy information for node 0/RSP1/CPU0: ========================================== Node 0/RSP1/CPU0 is in ACTIVE role Node Redundancy Partner (0/RSP0/CPU0) is in STANDBY role Standby node in 0/RSP0/CPU0 is ready Standby node in 0/RSP0/CPU0 is NSR-not-configured Node 0/RSP1/CPU0 is in process group PRIMARY role Process Redundancy Partner (0/RSP0/CPU0) is in BACKUP role Backup node in 0/RSP0/CPU0 is ready Backup node in 0/RSP0/CPU0 is NSR-ready
Reload and boot info ---------------------- A9K-RSP880-LT-TR reloaded Tue Jan 22 00:24:49 2019: 8 hours, 27 minutes ago Active node booted Tue Jan 22 01:30:12 2019: 7 hours, 22 minutes ago Last switch-over Tue Jan 22 01:37:28 2019: 7 hours, 15 minutes ago Standby node boot Tue Jan 22 02:41:18 2019: 6 hours, 11 minutes ago Standby node last went not ready Tue Jan 22 02:42:28 2019: 6 hours, 10 minutes ago Standby node last went ready Tue Jan 22 02:43:28 2019: 6 hours, 9 minutes ago There have been 2 switch-overs since reload
Active node reload Cause: MBI-HELLO reloading node on receiving reload notification Standby node reload "Cause: MBI-HELLO reloading node on receiving reload notification"
I'm having trouble performing a baremetal install of VIRL 1.6.65 on my Dell Server. I keep getting " failed Executing 'grub-install /dev/nvme0n1'. failed. this is a fatal error" I suspect it has something to do with the Partition Table: gpt.An...
I would like to introduce you to a new process flow called Intelligent RMA Experience (IRE), which is available for a select few product families.
As part of this process, we would like to leverage the CISCO Intellectual capital we have build over...
Welcome to Global Order Management RMA One Source Forum!
The objective of Global Order Management is to ensure every RMA is delivered to our customers within agreed commitment. We do it by providing and managing a comprehensive set of ...
The newly redesigned Demo Zone on Cisco.com is open for business. If you're not sure how a Cisco product or software will support your business and technological needs - learn about it here first in a variety of formats from podcasts to product walk thro...
THE CHALLENGEOld Dominion Freight Line had a unique dual-scope requirement to install PeopleNet On-Board Communication Systems in approximately 4,000 tractors across 208 locations as well as 140 Cisco Access Points at 92 locations. The sites for both inst...