cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1386
Views
15
Helpful
2
Replies

CSCve81314 - Clients fails to connect to AP with message as All AIDs are in use when the AP is in Local mode - 1

admins0011111
Level 1
Level 1

I have the same issue. I have 17 APs and about 350 clients.

Cisco Controller 5508

Software Version 8.5.103.0

AP 2702i

But rebooting does not help!

 

*apfMsConnTask_4: Apr 02 07:14:29.166: %LWAPP-3-INVALID_SLOT: spam_api.c:1750 The system detects an invalid slot identifier (0) - All the AIDs are in use. Could not allocate association identifier; AP 00:a6:ca:34:cc:90[...It occurred 2 times/sec!.]
*apfMsConnTask_4: Apr 02 07:14:26.993: %LWAPP-3-INVALID_SLOT: spam_api.c:1750 The system detects an invalid slot identifier (0) - All the AIDs are in use. Could not allocate association identifier; AP 00:a6:ca:34:cc:90
*apfMsConnTask_4: Apr 02 07:14:13.439: %LWAPP-3-INVALID_SLOT: spam_api.c:1750 The system detects an invalid slot identifier (0) - All the AIDs are in use. Could not allocate association identifier; AP 00:a6:ca:34:cc:90
*apfMsConnTask_4: Apr 02 07:14:09.410: %LWAPP-3-INVALID_SLOT: spam_api.c:1750 The system detects an invalid slot identifier (0) - All the AIDs are in use. Could not allocate association identifier; AP 00:a6:ca:34:cc:90

 

 

2 Replies 2

Leo Laohoo
Hall of Fame
Hall of Fame

@admins0011111 wrote:

Software Version 8.5.103.0


Upgrade the firmware of the controller.  At this version, even KRACK isn't fixed.

But I can't do it at the moment. Is there any workaround (not just reload AP)?