Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
569
Views
0
Helpful
1
Replies

CSCvf74866 - Webauth scaling improvements - fix problem with GUI going unresponsive with HTTPS redirect

aramirez@saisd.net
Level 1
Level 1

‎10-23-2018 12:22 PM

is there a way to restart/reset the emWeb process on a 5508? 

it has hit 100%, so my clients cannot get out. i tried restarting the whole controller, but that didn't help.

i am running version 8.3.141. this bug was supposed to be fixed on it.

 

thanks

Labels:
0 Helpful
1 Reply 1

Rich R
VIP
VIP

‎12-04-2018 02:55 AM

Just stumbled across this post after we've hit this problem.

Just to clarify for anyone else reading this - note that CSCvf74866 is *not* fixed in 8.3.141.0!

It is only fixed in 8.7 and later code - 8.8 recommended.

This is also documented at https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/115951-web-auth-wlc-guide-00.html#anc6

"It is advised not to use this feature before WLC version 8.7 where the scalability of this feature was enhanced"

Regards

RR

------------------------------
Please click Helpful if this post helped you and Select as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's   and   TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's,   Best Practices for 9800 WLC's   and   Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390
0 Helpful
Customers Also Viewed These Support Documents