Hi all,
I´m suspecting about also be affected by this CSC. The active member of 9500 in 16.8.1a has crashed with no reason apparently
Do you have more information related to this bug?
This is the log observed:
*Feb 25 10:16:02.802: %HMANRP-6-HMAN_IOS_CHANNEL_INFO: HMAN-IOS channel event for switch 2: EMP_RELAY: Channel UP!
*Feb 25 10:16:02.804: %PLATFORM-6-HASTATUS: RP switchover, received chassis event to become active
*Feb 25 10:16:02.812: %HMANRP-6-EMP_NO_ELECTION_INFO: Could not elect active EMP switch, setting emp active switch to 0: EMP_RELAY: Could not elect switch with mgmt port UP
*Feb 25 10:16:02.875: %REDUNDANCY-3-SWITCHOVER: RP switchover (PEER_NOT_PRESENT)
*Feb 25 10:16:02.875: %REDUNDANCY-3-SWITCHOVER: RP switchover (PEER_DOWN)
*Feb 25 10:16:02.875: %REDUNDANCY-3-SWITCHOVER: RP switchover (PEER_REDUNDANCY_STATE_CHANGE)
*Feb 25 10:16:02.881: %PLATFORM-6-HASTATUS: RP switchover, sent message became active. IOS is ready to switch to primary after chassis confirmation
*Feb 25 10:16:02.929: %PLATFORM-6-HASTATUS: RP switchover, received chassis event became active
*Feb 25 10:16:02.941: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 172.15.8.68 port 514 started - CLI initiated
*Feb 25 10:16:02.794: %STACKMGR-6-SWITCH_REMOVED: Switch 2 R0/0: stack_mgr: Switch 1 has been removed from the stack.
*Feb 25 10:16:03.131: %PLATFORM-6-HASTATUS_DETAIL: RP switchover, received chassis event became active. Switch to primary (count 1)
*Feb 25 10:16:03.149: pm_port_em_recovery
*Feb 25 10:16:03.226: %NGWC_USB_CONSOLE-6-CONFIG_ENABLE: Switch 2: Console media-type changed to default
*Feb 25 10:16:03.852: %HMANRP-5-CHASSIS_DOWN_EVENT: Chassis 1 gone DOWN!
*Feb 25 10:16:04.025: %LINK-3-UPDOWN: Interface Lsmpi19/3, changed state to up
*Feb 25 10:16:04.025: %LINK-3-UPDOWN: Interface EOBC19/1, changed state to up
*Feb 25 10:16:04.025: %LINEPROTO-5-UPDOWN: Line protocol on Interface LI-Null0, changed state to up
Thanks,
Raul
