Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,
I´m suspecting about also be affected by this CSC. The active member of 9500 in 16.8.1a has crashed with no reason apparently
Do you have more information related to this bug?
This is the log observed:
*Feb 25 10:16:02.802...
Right. You can connect the Cores 95K in VPC Domain 100 and the 93K Access layer in VPC Domain 101, for example. Four (or more) meshed links between both layers assigned to a VPC in each layer.
Over VPC is not supported dynamic routing. So, you hav...
Right. You can connect the Cores 95K in VPC Domain 100 and the 93K Access layer in VPC 101, for example. Four (or more) meshed links between both layers assigned to a VPC in each layer.
Over VPC is not supported dynamic routing. So, you have the op...
Trying link again:
https://www.cisco.com/c/dam/en/us/products/collateral/switches/nexus-7000-series-switches/C07-572830-00_Agg_Dsgn_Config_DG.pdf
The routing is nos supported trough VPC connections, when the peer adjacency ends in the Nexus VPC. ...
It is interesting VPC double sided configuration. I have used succesfully lot of times. The connection between the two N9K layers is done with VPC. Check related section in https://www.cisco.com/c/dam/en/us/products/collateral/switches/nexus-7000-ser...
Hello, I have a doubt related to this issue. How Cisco Nexus detects the MTU inconsistency between the physical interfaces associated to the port-channel between two Cisco Nexus switches?. CDP or LLDP (DCBXP)? We must implement in a live DaCe...
