cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
379
Views
5
Helpful
0
Replies

CSCvz10133 - MPLS EVPN-VPWS Packet Drop Validation 7.3.2

rachael-CNI
Level 1
Level 1

Is this an issue where both 1 and 2 conditions need to be meet or is that either/or?

How can I check to see if I am running the J2 NPU based platform?

If it is an either/or condition then how do I check to see if MPLS label conflict is happening?

Conditions:
1) L2VPN P2P traffic (VPWS and EVPN) over BGP-LU core on J2 NPU based platforms.
No trigger required.

2) MPLS label conflict could happen in data plane after EVPN VPWS labels are released and allocate it as new adjacency label.

0 Replies 0