IOS bug CSCuh55760-3850 Switch

[swanded88]

Upgrading the 3850 switch to IOS 03.03.02 did not solve the sensor temperature issue that was reported in IOS 03.02.02.  Any status on when this is going to be resolved? Looking to rid the sensor warnings from NPM.

Thank You

David

[rayala00111]

Hello , I have the same problem in my CAT3850 : 

WS-C3850-48T       03.03.05SE        cat3k_caa-universalk9

Switch 1: SYSTEM TEMPERATURE is OK

Inlet Temperature Value: 20 Degree Celsius

Temperature State: GREEN

Yellow Threshold : 41 Degree Celsius

Red Threshold    : 56 Degree Celsius

Hotspot Temperature Value: 39 Degree Celsius

Temperature State: GREEN

Yellow Threshold : 105 Degree Celsius

Red Threshold    : 125 Degree Celsius

SWITCH: 2

Switch 2 FAN 1 is OK

Switch 2 FAN 2 is OK

Switch 2 FAN 3 is OK

FAN PS-1 is OK

FAN PS-2 is OK

Switch 2: SYSTEM TEMPERATURE is OK

Inlet Temperature Value: 20 Degree Celsius

Temperature State: GREEN

Yellow Threshold : 41 Degree Celsius

Red Threshold    : 56 Degree Celsius

Hotspot Temperature Value: 38 Degree Celsius

Temperature State: GREEN

Yellow Threshold : 105 Degree Celsius

Red Threshold    : 125 Degree Celsius