Cisco DNA Center + 802.11r Fast Roaming, how to activate?

[mdurupt]

Hi Guys,

Well I would like to activate 802.11r for my corporate Wifi since our wlan card are compatible with fast-roaming.

Configuring this settigs, directly from my WLC9800 is pretty easy, you edit the WLAN, Enable Fast Transition and mark FT+802.1x

However, my whole WLC configuration is set with Cisco DNA Center.

How do you activate Fast Roaming using DNACenter? I am currently working with version 2.3.3.5

The only settings I have found is this but It seems not enough.

Many thanks for your help.

Regards

[Flavio Miranda]

Hi

 For configuration not present on the network profile the only option I see if run cli template.

 You can take the commamd here

https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/b_wl_16_10_cg/802-11r-bss-fast-transition.html 

[mdurupt]

Hi Flavio,

Thank you for your answer. I have seen this solution but it's direct configuration into the WLC. If I do this, the configuration between DNA Center & WLC is going to be non-compliant.

Any solution directly from DNA Center?

[Flavio Miranda]

I was mentioning from dnac. 

https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network-automation-and-management/dna-center/2-1-2/user_guide/b_cisco_dna_center_ug_2_1_2/b_cisco_dna_center_ug_2_1_1_chapter_01000.html

You should be able to run cli template to devices from DNAC