When I try to provision the WLC to Cisco DNA in the WLC I got the follwing error:
Nov 8 03:56:26.302: %DMI-5-AUTH_PASSED: Chassis 1 R0/0: dmiauthd: User 'dnac' authenticated successfully from 192.168.3.94:37243 for netconf over ssh. External groups: PRIV15
Nov 8 03:56:36.803: %PKI-3-PKCS12_IMPORT_FAILURE: PKCS #12 import failed for trustpoint: sdn-network-infra-iwan. Reason: Failed to read PKCS12 from url: http://192.168.3.82/api/v1/trust-point/pkcs12/5036741e-a105-4902-8c5b-e7cb2d111111/ohjl7onbrucb2273n86qavvrt5
Nov 8 03:56:36.806: %PKI-6-TRUSTPOINT_CREATE: Trustpoint: sdn-network-infra-iwan created succesfully
Nov 8 03:56:46.915: %PKI-3-PKCS12_IMPORT_FAILURE: PKCS #12 import failed for trustpoint: sdn-network-infra-iwan. Reason: Failed to read PKCS12 from url: http://192.168.3.82/api/v1/trust-point/pkcs12/5036741e-a105-4902-8c5b-e7cb2d111111/ohjl7onbrucb2273n86qavvrt5
Nov 8 03:56:46.918: %PKI-6-TRUSTPOINT_DELETE: Trustpoint: sdn-network-infra-iwan deleted succesfully
Nov 8 03:56:46.923: %SYS-5-CONFIG_P: Configured programmatically by process iosp_dmiauthd_conn_100001_vty_100001 from console as dnac on vty62
Nov 8 03:56:46.924: %DMI-5-SYNC_NEEDED: Chassis 1 R0/0: dmiauthd: Configuration change requiring running configuration sync detected - 'Failed to rollback configuration'. The running configuration will be synchronized to the NETCONF running data store.
Nov 8 03:56:47.007: %DMI-5-SYNC_START: Chassis 1 R0/0: dmiauthd: Synchronization of the running configuration to the NETCONF running data store has started.
Nov 8 03:56:51.864: %DMI-5-SYNC_COMPLETE: Chassis 1 R0/0: dmiauthd: The running configuration has been synchronized to the NETCONF running data store.
Nov 8 03:58:00.666: %SYS-6-LOGOUT: User dnac has exited tty session 2(192.168.3.94)dn-network-infra-iwan. Reason: Failed to read PKCS12
In Cisco DNA I can see this information:
No output:
